Lytecaster® Recessed Downlighting
1000LVNT
Page 1 of 1
5" Aperture Low Voltage MR16 Remote Transformer Frame-In Kit
1
6
Ceiling Opening
Complete Fixture consists of Reflector Trim & Frame-In Kit. Select each separately.
Frame-In Kit
Reflector Trims — See Individual Reflector Trim Specification Sheets
Adjustable
1000LVNT
Baffles
Aperture Cone
Pinhole
Elbow
1055LV
1055WHLV
1056LV 1064WDLV
1063LV 1064WDPLV
1064LV
1052LV
1062LV
1064CDLV
Features
Options & Accessories
Mounting Bars:
T-Bar Ceiling Clips:
Plaster Ceiling Ring:
Extra-Thick Ceiling
1. Mounting Frame: .036" (#20 ga.) galvanized steel. Accommodates all
ceilings up to 1" thick; including existing or inaccessible areas. Breakout
section and anchor nails permits installation in existing ceilings from below.
Push-in/twist-out rotoclips hold reflector flush to ceiling.
1964 - 20" set of (2)
1956 - set of (4)
1960 - 7/8" depth for wet plaster ceilings.
1967B - up to 2" thick ceilings.
2. Junction Box: 4" x 3 1/2”x 2", .063" (#14 ga.) galvanized steel. U.L. listed for
maximum of 8 No. 12 ga. 90° C through branch circuit conductors (75° C end
of run). Integral cable clamps permit attachment of nonmetallic Romex® or
armored cable without need of additional connectors.
Mounting Ring:
Remote Transformer:
MR16 Socket Replacement:
Remodeler Anchor Clip:
8608 or 8609
1975A
1985N
3. Mounting Bars: .059" (#16 ga.) galvanized steel. 13" long bars extend
to 27" with integral nailing tabs. Attaches to wood joist without need of
accessories.
Labels
UL (Suitable for Damp Locations), I.B.E.W.
4. Socket Housing: .036" (#20 ga.) galvanized steel.
5. Socket: Field replaceable. Two pin socket, pre-wired with #18 SF1 leads to
junction box.
6. Thermal Protector: Meets NEC and UL requirements. Insulation must be
kept 3" away from fixture sides and wiring compartments and must not be
placed above fixture in a manner which will entrap heat.
7. Transformer: Frame-in Kit is provided without transformer. Transformer
must be provided by others. Lightolier Cat. #8608 or 8609 transformers may
be used. Frame-in Kit is rated at 65VA. Use only 12V A.C. input.
Romex® is a registered Trademark of General Cable Industries Inc.
US Patent No.: 5,045,985
Job Information
Type:
Job Name:
Cat. No.:
Dimming
Lamp(s):
Notes:
Dimming Controls: use only dimmers specifically designed for use with mag-
netic transformers, like Lightolier Onset®, Sunrise® series LV or VA dimmers,
or any Lightolier Controls dimming system. Low voltage fixtures may produce
audible sound when used with dimmers, which may be objectionable in acousti-
cally critical areas.
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
Lightolier is a Philips group brand
|
Krups Espresso Maker XP 4050 User Manual
KWC Music Mixer 802259 User Manual
Lennox International Inc Furnace G32V SERIES User Manual
LG Electronics Refrigerator LRSC21935 User Manual
Liebherr Ice Maker 120309 7084442 00 User Manual
Lowrance electronic GPS Receiver 10519001 User Manual
Mace Security Camera CAM 96 User Manual
Magnadyne DVD Player MV DVD PL8 User Manual
Makita Home Safety Product BML18 User Manual
Mercedes Benz Automobile 2002 SLK 230 Kompressor User Manual